Sharp CD-SW300 - Manual (Page 38)

03/12/19 CD-SW300 34-43.fm
38
CD-SW300
Advanced Features
Enhancing your system
The connection cord is not included. Purchase a commercially avail-
able cord as shown below. Listening to playback sounds of Game, VCR,
DVD, etc.
Note:
To prevent noise interference, place the unit away from the television.
Auto power on function:
When you press any of the following buttons, the unit turns on.
GAME/VIDEO button (main unit and remote control): The unit
turns on and the "GAME" function is activated.
/ button on the main unit: The unit turns on and playback of
the last function starts (CD,TAPE,TUNER,GAME/VIDEO).
To record on a tape from game, VCR, etc.
AC INPUT
GAME or VCR, DVD, etc.
Red Yellow
Yellow
To the line output jacks
RCA cord
(not supplied) Video cable
(not supplied)
Red
White
To video
input jack
Video cable
(not supplied)
Yellow
TV
Yellow
White
1 Connect a video game system, VCR, DVD, etc. to the front
GAME INPUT (VIDEO, AUDIO L and R) jacks.
2 Connect a TV to the rear VIDEO OUT jacks.
Switch the TV input to auxiliary.
3 Press the ON/STAND-BY button to turn the power on.
4 Press the GAME/VIDEO button.
5 Play the connected equipment.
You can enjoy sounds from the supplied speakers and images
on the TV.
1 Insert a cassette in the TAPE 2 cassette compartment.
2 Press the GAME/VIDEO button.
3 Press the button.
4 Press the / (TAPE ) button.
5 Start the game system, VCR, etc.