Sharp CD-SW300 - Manual (Page 35)

03/12/19 CD-SW300 34-43.fm
35
CD-SW300
Advanced Features
Continued to the next page
4 Within 10 seconds, press the or button to se-
lect "ONCE SET" or "DAILY SET", and press the MEMORY
button.
5 Press the or button to select "PLAY" or
"REC", and press the MEMORY button.
The illustrations show the daily timer setting.
6 Press the or button to adjust the hour and
then press the MEMORY button.
The illustrations show the timer playback setting in the daily tim-
er mode.
7 Press the or button to adjust the minutes and
then press the MEMORY button.
8 Set the time to finish as in steps 6 and 7 above.
White Red
9 Switch input with the or button, and then
press the MEMORY button.
To select the timer playback source: CD, TUNER, TAPE 1 or
TAPE 2.
To select the timer recording source: TUNER.
When you select the tuner, select a station by pressing the
or button, and then press the MEMORY but-
ton.
If a station has not been programmed, "NO PRESET" will be
displayed and timer setting will be canceled.
10 Adjust the volume using the VOLUME control, and then
press the MEMORY button.
Do not turn the volume up too high.
11 Press the ON/STAND-BY button to enter the power stand-
by mode.
The "TIMER" indicator lights up and the unit is ready for timer
playback or timer recording.