Savin Fax Option Type 1027 - Manual (Page 56)

Appendix
188
11
❖ ❖ ❖ ❖ Adjusting the handset bell volume
Adjust the handset ringer volume using the volume switch.
Selecting the Line Type
Select the Line type to which the machine is connected. There are two types: tone
and pulse dial.
Select the Line Type using "PSTN Line Type" in "Key Operator Settings". The de-
fault settings is "Tone".
⇒ p.172 “Selecting Dial/Push Phone”
Multi-port
When the optional ISDN Unit or optional Extra G3 Interface Unit is installed,
communications can take place simultaneously through multiple lines.
Note
❒ A maximum of three communications can take place simultaneously.
❒ You cannot perform three Immediate Transmissions simultaneously.
❒ If three fax messages are received simultaneously, they cannot be printed out
at the same time.
❒ If three communications are in progress, the display shows the first commu-
nication that was initiated.
Option Available Line Types Available Protocol Combinations
Without option PSTN G3
Extra G3 Interface Unit PSTN+PSTN G3+G3
ISDN Unit PSTN+ISDN G3+G4
or
G3 (ISDN)+G4
ISDN G3 (ISDN)+G4
Extra G3 Interface Unit+IS-
DN Unit PSTN+PSTN+ISDN G3+G3+G4
or
G3+G3(ISDN)+G4
PSTN+ISDN G3+G3(ISDN)+G4
or
G3 (ISDN)+G3(ISDN)
Ringer
1
3
2
6
9
5
8
0 4
7
ND1X00E1
RusC2FaxADEN-F_V4_FM.book Page 188 Monday, August 20, 2001 10:52 AM