Samsung ASBH500JBECSTA - Manual

Quick Start Guide
Bluetooth Stereo Headset
SBH500
Thank you for purchasing the Samsung Bluetooth
Stereo Headset SBH500, we hope you will be delighted
with its operation.
Take a moment before you get started to familiarize
yourself with your new headset.
Make sure you have the following items with your
headset: Travel adapter, User’s Guide
Make sure you have the following items with your
headset: Travel adapter, User’s Guide
Check the accessories Check the accessories Charge your headset Charge your headset
Charge the headset's battery fully before using
the headset for the first time.
1 Open the adapter jack cover and plug the
travel adapter into the adapter jack.
2 Plug the travel adapter into the AC wall
outlet.
• Charge the headset until the red light on the
headset turns to blue.
• The headset will be fully charged in approximately
3 hours.
Before you can use your headset, you must pair it
with your phone.
Put your headset in
pairing mode
1 Set your Bluetooth phone to discover the
headset by following your phone user’s guide.
Typically, the steps involve going to the Settings,
Connection, or Bluetooth menu on your
phone and then selecting the option to discover
Bluetooth devices.
Your phone will find the Samsung SBH500
headset.
2 Select Samsung SBH500.
3 When the phone asks if you want to pair with it,
confirm by selecting Yes or OK.
4 Enter the headset passkey or PIN, 0000.
Turn on Bluetooth on your
phone and pair with headset
Your phone and headset are now paired and
ready to make and receive calls. To confirm
they are operating properly, make a call:
1 Place the headset over your ear.
See Wear the headset on the reverse
side of this guide.
2 On your phone, make a call to the number
you want.
3 If your phone and headset are successfully
paired, you will hear ringing on the headset.
After you have successfully paired your phone
and headset, you do not need to repeat these
initial setup steps each time you use the
headset.
Test and use
Using your headset
See Features and Functions Guide
on the reverse side of this guide
for information on using your
SBH500.
• If you turn on the headset for the first time,
it proceeds into pairing mode immediately.
• If you have paired the headset with other
Bluetooth devices, make sure that the headset
is off (see Turn headset on or off on the reverse
side of this guide). Then turn on the headset with
pressing and holding . After the indicator
sequentially flashes blue, red, and purple twice,
it will turn to blue.
Headset overview
Talk button
REW Button
FF Button
Play/Pause/
Stop Button
Indicator
Light
ON/OFF
Switch
Adapter
jack
Volume Control
Buttons
NOTES:
• The headset cannot be used while charging.
• Use only a Samsung-approved charger or adapter.
NOTE:
The items supplied with your headset and the accessories
at your Samsung dealer may vary, depending on you
country or service provider.
Supported Bluetooth profiles:
• Advanced Audio Distribution Profile
• Audio/Video Remote Control Profile
• Headset Profile
• Hands-Free Profile
Start here
Charge your headset
Put your headset in pairing mode
Turn on Bluetooth on your phone and
pair with headset
Test and use
Get connected in 4 quick steps
Guide No.: GH68-xxxxxA
09/2007. Rev. 1.0
Headquarters:
1301 East Lookout Drive Suite 150
Richardson, TX 75082
Internet Address:
http://www.samsungmobileusa.com/
accessories
Customer Care Center:
1-888-987-4357