Sharp UX-460 - Manual (Page 58)

(Example)
(Example)
2
When you hear a short beep, speak
into the telephone to record the new
message.
••
The message can be up to 15
seconds long. After 15 seconds (or
earlier if the machine detects
silence after you finish speaking),
you will hear a beep, and the new
message will be played back.
Turning the Transfer function on or off
To turn Transfer on: Press "9", "1",
and "#" on the telephone.
To turn Transfer off: Press "9", "2",
and "#" on the telephone.
Changing the transfer telephone number
1
Press "9", "0", and "#" on the telephone.
1 9
0 9
2
After you hear a short beep, enter the
new telephone number. When
finished, press "#".
••
To insert a pause between any two
digits of the number, press "
*".
4 5 1 6 3 1 4
Remote Operations
56