Sharp UX-460 - Manual (Page 52)

Remote Operations
You can call the UX-460 from any touch-tone telephone and play back
your messages using the remote commands. You can also use these
commands to change the reception mode and other settings.
Remote code number
To perform remote operations, you must first program a remote code
number. This number is used to prevent unauthorized people from
listening to your messages or changing the settings of your machine.
The remote code number has been set to "001" at the factory. If you
want to change it, press the panel keys as shown below.
1
Press these keys:
0
FUNCTION
The display will show: T.A.D. SETTINGS
2
Press these keys:
The display will show: REMOTE CODE
3
Enter a 3-digit number by pressing the
number keys.
4
Press the START/MEMORY key and
then the STOP key.
(Example)
2 2
STOP
START/MEMORY
2
Remote Operations
50