Sony PCV-RX370DS - Manual (Page 80)

VAIO Digital Studio™ User Guide
80
Topic: My i.LINK
®
device does not appear on the desktop
1 Turn off and disconnect your device.
2 Reconnect your device.
3 Then turn on the power.
Topic: My connected printer doesn't function after the computer resumes from
a power saving mode
When this occurs, follow the procedures below to reset the printer connection:
1 Right-click the My Computer icon on the desktop, and then select
Properties.
2 Click the Device Manager tab.
3 Select Refresh, and then click OK.
4 The printer should now function properly.
Topic: How do I enable my Ethernet interface?
1 Click on My Computer icon on the desktop.
2 Click on Control Panel, and then click on System.
3 Click the Device Manager tab.
4 Click on the Network Adapters category, and then select "Realtek RTL8139
(A/B/C/8130) PCI Fast Ethernet NIC."
5 Click the Properties button.
6 Remove the checkmark from the option "Disable in this hardware profile."
7 Click OK.
8 Close the Control Panel window.