Sony SCPH-30006 R - Manual (Page 5)

5
GB
Connecting to a TV with an S VIDEO input connector
Connecting to a VCR
Connect your PlayStation ® 2 console to the VCR
using the supplied AV cable (integrated audio/
video) matching the plug colors.
If your VCR is monaural, do not connect the
red plug.
However, when playing a DVD video, do not
connect the console to a VCR. If you do,
picture quality may be reduced. Connect the
console directly to the TV.
After connecting
Set your TV and VCR adjustments
appropriately.
Refer to the instruction manuals for your TV
and VCR.
Connect your PlayStation ® 2 console to the
S VIDEO input connector on the TV using the
SCPH-10060G S VIDEO cable (sold separately).
You will get a better picture.
After connecting
Set your TV to the appropriate video input
mode (such as “S VIDEO”).
VCR
Connect directly
TV
When playing a DVD video
To AV MULTI OUT
connector
To S VIDEO
input
Connecting to a TV with component video input connectors
If your monitor or projector has component
video input connectors (Y, C
B /P B , C R /P R ),
connect your PlayStation ® 2 console using the
SCPH-10100G component AV cable (for
PlayStation
® 2) (sold separately). This will
provide the best picture.
Before connecting
If you connect your PlayStation ® 2 console to a
television using the component AV cable
without first setting the “Component Video
Out” option under the “System Configuration”
menu to “Y Cb/Pb Cr/Pr,” the TV screen
might not display properly. Before connecting
your console with the component AV cable,
first use the supplied AV cable (integrated
audio/video) and make sure that the
“Component Video Out” option is set to
“Y Cb/Pb Cr/Pr.”
Note
The PlayStation ® 2 console is not compatible with HDTV
unless the proper software and connecting devices are
used.
Refer to the instruction manual for your TV for details.
To audio
input
To AV MULTI OUT
connector
To component
video input
connectors
When turning on the console for the first time
The initial setup screen appears.
Set “Language,” “Time Zone” and “Daylight Savings Time
(Summer Time)” according to the instructions on the
screen.
Settings can be adjusted later in the System Configuration
menu. For details, see “Using the System Configuration
menu” on page 7.
Connection
PlayStation ® 2
console
To audio input
(left)
To audio input
(right)