Teletext / other fea, Teletext / other fea tures tures, Teletext other functions – Sanyo CE32LM4WPR-E User Manual

Page 10

TELETEXT / OTHER FEA

TURES

Teletext reception

If your aerial signal is poor, the teletext reception operation may be
erratic.

Teletext brightness level

You can change the teletext brightness level. Please return to TV
mode.(See Picture menu -Text Brightness on page 7).

■

Switching into /from standby mode

The Standby mode is used for switching the LCD monitor off for
short periods of time. In standby mode the monitor is switched off
but is still receiving mains power.

●

To turn the monitor into standby mode, press the

button.

The blue power indicator illuminates more brightly

●

To turn the monitor ON from standby mode, press any of the
following buttons:

or 0-9 buttons.

■

Auto shut off

This monitor will automatically switch into the standby mode, 10
minutes after a signal is no longer received. The time until the set
will switch off is displayed on the screen.

■

Sound system selection and Programme
information

Press the

button to display the programme information such as

current programme number, station name, stereo status, sound sys-
tem and remains time if set the timer, for about 5 seconds.

S-1: B/G sound system
S-2: D/K sound system
S-3: I Sound system
S-4: France SECAM L/L’ system

■

Use of Audio Output Jacks

The audio monitor out sockets on the rear of the set provide a fixed
level audio output for reproducing sound via your audio equipment.

Page up and down

To select the next or

previous page numbers

Standby

To switch the TV on and off.

JXPLA

Reveal switch.
This reveals hidden items on the teletext
page eg:a hidden answer to a quiz question.

Teletext / TV
to access this featurepress the TXT/TV button
the picture changes from TV-TXT-MIX and
back to TV.

Direct Access to subjct headings.
Coloured boxes are displayed at
bottom of screen, the four coloured buttons
give access to the corresponding subject
or pages.

Size switch
This will make either the top half
or the bottom half of the page expand
to fill the screen.

Direct access to page.
All the numeric buttons can be used
to select a page number directly.
If you need page 301, then press 3 then
0 and then 1.

Sub page access.
Some text pages are made up of severall
sub pages which rotate automatically. If you
wish to view page 4 of 8 then press the sub
page button.
"----" will appear. Enter 0004 and the page
will appear.

Index page selector
This selects one of the teletext index pages.

Cursor
Press the button to select the next page
or the previous page number

Teletext

Other functions

If you find the power indicator flashing, disconnect
power cord from the power outlet and contact our
Service desk.

This warning is a sign to let you know that the power
protection function of this TV set is now operating.