Schumacher MSC-2405 - Manual (Page 9)

• 7 •
ASSEMBLy INSTRUCTIONS 9.
No assembly required.
PRODUCT FEATURES 10.
MOUNTING CHARGER TO A FLAT SURFACE 11.
Do not mount charger in a location with restricted air flow. The area
where the charger is to be fastened must be dry, well ventilated and
away from any combustible material and fumes.
Turn off and disconnect charger.
11.1
Place the back of the charger with mounting bracket against a secure, flat 11.2
surface.
Securely mount charger to a flat surface with a minimum of one and a half
11.3
inches of clearance on each side.
Charger Status LEDs (located on side of unit) 1.
Battery Clamp Output Cord 2.
30 Pin XLR 3-12C Output Cord 3.
3/8” Dia. Ring Terminal Output Cord 4.
1
2
3
4