Sharp AN-65AG1 - Manual (Page 7)

E-6
Installing the wall-mount bracket (Continued)
Connect the system cables and power cord to the terminals on the back
of the LCD color TV.
Cable holders
Surround the system cables.
(1) Pass through
the band.
(2) Pull the band
forward and
catch it on
the hook.
Use the cable holder at the center of the back of the LCD color TV and the cable holders
holding the speaker cables to connect the system cables.
Remove the screw hole plugs (4 plugs) of
the wall-mount bracket on the back of the
TV and then screw in the 4 wall-mount
bracket unit screws (hexagonal socket
screws, M10 length: 30 mm) that are in-
cluded with the wall-mount bracket unit.
Carefully keep the removed screw hole plugs.
Screw hole plugs (4 plugs)
Mark A
Included hexagonal socket screws (4 screws)
Use an Allen wrench to screw in the included
hexagonal socket screws into the Mark A holes.
System cables
Power cord
Wall-mount bracket
Included part
Hexagonal socket screws
(M10 length: 30 mm)
Allen wrench
4
5
6