Sharp AN-65AG1 - Manual (Page 10)

ENGLISH
E-9
Installing the LCD color TV on the wall
Caution
Install the wall-mount bracket attached to the LCD color TV to the base bracket.
Hang the square holes of the wall-mount bracket on the hooks (see page 5) of the base
bracket unit.
Check to make sure the hooks are securely inserted into the notches at the top of the slanted
side of the wall-mount bracket unit.
• Be sure to use at least 4 people when installing the LCD color TV to the base bracket.
• Be sure to perform Steps 1 and 2 below. Only performing Step 1 could result in the display falling and
injuring someone.
Hook
Notch
Wall
Fasten the screws in the wall-mount bracket
unit and bottom of the base bracket (Be sure
to do this).
Fasten using the included wall-mount bracket
fastening screws (M6 length: 8 mm × 2 screws).
Included part
Wall-mount bracket fastening screws
M6 length: 8mm (2 screws)
1
2