Product description, Specifications c3410 – Shindaiwa 81714 User Manual

Page 5

Brushcutter Blade

Cutting

Attachment Shield

Gear Case

Throttle

Trigger

Product Description

Using the accompanying illustrations as

a guide, familiarize yourself with this unit

and its various components. See Figure 4.

Understanding your unit helps ensure top

performance, long service life, and safer

operation.

Figure 4

Specifications C3410

C3410 dry weight

(less attachments) ....................................................... 14.1 lb./6.4 kg
Engine model .........................................................................SF3410E
Engine type .......................................... with Power Boost Chamber
Bore x stroke ................................................ 1.5 x 1. in./38 x30 mm
Displacement .............................................................1 cu. in./ 34 cc
Maximum power ........................................................ 1.4 HP/1.0 kW

@ 8,000 RPM (min

-1

)

Fuel/oil ratio ................................ 50:1 with ISO-L-EGD or JASO FC

class -cycle mixing oil*

Carburetor type ..................................Walbro WYL, diaphragm-type
Fuel tank capacity ...................................................... 3.7 oz./700 ml
Ignition .............................................................. One-piece electronic,

program-controlled

Spark plug ......................................................................NGK CMR5H

Prior to Assembly

Before assembling, make sure you have all

the components required for a complete

unit and inspect unit and components for

any damage.

Specifications are subject to change without notice.

Air cleaner type ...................................... Non-reversible heavy-duty

filter element

Starting method ........................................................................Recoil
Stopping method .............................................................Slide switch
Transmission type .............................Automatic, centrifugal clutch

w/bevel gear

EPA Emission

Compliance Period** .......................................................Category A

** The EPA emission compliance referred to on the emission compliance label

located on the engine, indicates the number of operating hours for which the

engine has been shown to meet Federal emission requirements. Category

C = 50 hours (Moderate), B = 15 hours (Intermediate) and A = 300 hours

(Extended).

Engine/Outer tube assembly

Handlebar and Throttle assembly

Cutting attachment

Kit containing cutting attachment shield

mounting bracket and hardware, this

owner’s/operator’s manual and tool kit

for routine maintenance. Tool kits

vary by model and may include a hex

wrench set, a spark plug/screwdriver

combination wrench, and a spanner.

This unit comes fully assembled with the

exception of the handlebar cutting attach-

ment shield and cutting attachment.

meets or exceeds these specifications and is

recommended for all Shindaiwa products.

WARNING!

Do not make unauthorized modifications

or alterations to any of these units or

their components.

C3410 BRUSHCUTTER

Outer Tube

Handle Bar

Ignition

Switch

Fuel

Tank

IMPORTANT!

The terms “left”, “left-hand”, and “LH”;

“right”, “right-hand”, and “RH”; “front” and

“rear” refer to directions as viewed by the

operator during normal operation.

Muffler

Spark Plug

Hanger

Throttle

Interlock