Silvercrest KH 2430 - Manual (Page 20)

22
Service and operation
USB Record Player KH 2430
GB
Operation during playback
To stop playback press the button ‹ Stop playback 2 . The turntable stops
and the pick-up arm remains in its current position.
IMPORTANT
Possible damage to the record or the needle.
If playback is stopped when the needle is still on the record it can lead to
damage.
Move the pick-up arm lever ► 11 to the rear position before pressing the
Stop playback 2 button.
To continue after stopping playback press the button ‹ Continue playback 4
and move the pick-up arm lever 11 to the forward position.
To end playback press the button ‹ End playback 3 . The turntable stops
and the pick-up arm 13 returns to its starting position.
Setting recording level
NOTE
The recording level setting is not possible with all operating systems. ►
In the operating systems mixer settings set the re- ‹
cording level so that in the drive indicator (1) -6dB
is not exceeded.
1