SIIG 5090S - Manual (Page 7)

7
Using the 2.5" USB 2.0 to SATA
Enclosure
An additional drive icon will appear in My
Computer or Computer when the enclosure is
plugged into a USB port. The drive acts just like
a conventional hard drive in your system.
Disconnecting From The Computer
Before unplugging the 2.5" USB 2.0 to SATA
Enclosure from the computer, follow the steps
below for your version of Windows. The same
rule applies when turning off the Enclosure. Not
following the instructions may result in data
corruption or damage to the hard drive.
Windows 7
1.
Verify that the LED is not flashing before
proceeding.
2. Click Show hidden icons, click the Safely
Remove Hardware and Eject Media icon
located in the system tray by the system
clock.
3. Click Eject USB to Serial-ATA bridge.