Shown on display led – Smeg SLB12SB User Manual
Page 11

0
6WDUW3DXVH EXWWRQ /('
This LED lights up when the washing cycle starts (Start-
Pause button pressed) and remains on until the end of the
programme.
1
6HOHFW GHOD\HG VWDUW EXW
WRQ
Press this button repeatedly to select after how many hours
you want the selected washing/drying programme to start.
The default value is 0 hours 0 minutes and each time the but-
ton is pressed it increases by 60’ up to 12h and by 120’ for
the following 12 hours, up to 24 hours.
2
6HOHFW GHOD\HG VWDUW EXWWRQ
LED*
The LED lights up while the delayed start time is being se-
lected and remains on until the programme starts.
3
'HOD\HG VWDUW WLPH
shown on
display LED*
This LED indicates that the display is showing the selected
delayed start time.
Only for models featuring the delayed start option
'(7(5*(17 75$<
This is located to the left of the control panel. Pull it out to
open.
The tray comprises four compartments which are marked as
follows
“
´
: pre-wash detergent
³´
: main wash detergent
“
” or
³´
: fabric softener, starch, etc. (treatment products).
Compartment
³´
is used for bleach. If there is a cover marked
, this means that bleach cannot be used with this model of
machine. If bleach can be used with the machine, there is no
cover.