Sony DMX-WL1 User Manual

Page 22

Poor picture or diminished sound
quality

• Because of the wireless transmission, the quality of the picture is not the same

as HDMI connection.

• Press CONNECT to search for a better wireless channel.
• Move the transmitter unit closer to the receiver unit.
• Try to install the receiver unit in an alternate location.
• Try to find the best placement and direction of the transmitter unit and the

receiver unit.

• Remove the objects between the transmitter unit and the receiver unit.
• If you use a cordless phone, try turning off the power or moving it away from

the units.

• If you use 5 GHz wireless LAN, try turning off the power or moving it away

from the units.

Remote control does not work

• Check the polarity of the batteries or replace the batteries.
• When some functions do not work, operate with the remote control of your

equipment.

• The supplied remote control is universal. For the corresponding equipment, see

Web site.

• Not all operations are guaranteed even for equipment from manufacturers

supported by this unit.

• The supplied remote control cannot be used to turn on or off the receiver unit

separately from the TV.

A new remote control will not
work

• If you wish to use a new remote control, press CONNECT and INPUT

SELECT at the same time and hold for a few seconds until the Initial Setup
menu appears.
Follow the instructions to complete initial setup.

Connected equipment will not
work

• Put the IR Blaster in a location visible to the IR receiver of the equipment.

Receiver unit will not power off

• The power of the receiver unit turns on or off in conjunction with TV if HDMI

Control or Control for HDMI of the TV is On and the unit is connected to the
TV by HDMI cable.

No sound for IN 1 HDMI Audio

• IN 1 HDMI AUDIO input is available only when IN1 HDMI has no audio data.

Compressed audio is not output
from the transmitter unit

• Your TV must support compressed audio in order for the transmitter unit to

output compressed audio from the optical output.

Condition

Explanation/Solution