Smeg WM62141 - Manual (Page 18)

187348
interrupted, and when the power is restored the
program is automatically resumed.
If a power failure occurs when the drum is
still full of water, be careful not to open the
door before you pump the water out.
•
Lock
- It is switched on by simultaneously pressing the
Quich wash button (C) and HWL button (D) for
at least 3 seconds. Selection is confirmed by the
sound signal and illuminated signal LED Lock/
End. The function is switched off following the
same procedure.
- As long as the Lock function is engaged
you may not alter the program or additional
functions. You may merely switch off the
machine by turning the program selector (A) to
the position “0”. Lock remains active even after
the appliance is switched off, and you have to
disengage it if you want to select a new washing
program.
•
Setting the sound signal
The appliance has the possibility of setting
stronger sound signal. Press the Spin button
(B) and switch the machine on. The selection of
the function is confirmed by the sound signal.
The function is disengaged following the same
procedure.
Special functions Special functions
18