Woodstock D4028 - Manual

COPYRIGHT © OCTOBER, 2010 BY WOODSTOCK INTERNATIONAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC. Printed in China #13363TS
Model D4028/D4032
8" & 12" Digital Scale
Instruction Sheet
Phone #: (360) 734-3482 • Online Tech Support: [email protected] • Web: www.shopfox.biz
Introduction
Mount the Model D4028/D4032 on woodworking and
metalworking machinery for precise relative distance
measurements between fixed and moving parts, such as
table height, cutter height, tool depth and more.
Specifications
Maximum Measuring Distance (D4028) ..... 8 1 ⁄
2
" (216mm)
Maximum Measuring Distance (D4032) ..... 12 3 ⁄
4
" (324mm
Resolution ............................................... 0.01mm
Maximum Measuring Speed ..................... 1500mm/sec
Battery................... One 1.5V AG13 (LR44) Button Cell
Data Port ................................... 2-Conductor Serial
Identification
Refer to Figure 1 and the following descriptions to better
understand the components of the digital scale.
A. Upper Mounting Bracket: Secures the scale body to
a fixed machine part with 3 ⁄
8
" screws (not included).
B. OFF Button: Turns unit OFF.
C. Data Port: Allows a connection to an exterior
device.
D. ON/Zero Button: Turns unit ON and zeros the display
when held.
E. Battery Compartment Cover: Slides to the right for
access to the battery.
F. Display Mounting Bracket: Installs on the back
of the display unit with the two included M3-.5 x
6 Phillips head screws, and mounts to a movable
machine part with 3 ⁄
8
" fasteners.
G. Lower Mounting Bracket: Works with the upper
mounting bracket to secure the scale body.
H. Scale: Shows the relative distance the display unit
moves in inches (0.10" resolution) and millimeters.
Figure 1. Identification (Model D4028
shown).
A
L B
C
D
E
F
G
H
I
K
J
I. Decreasing Button: When held,
decreases the displayed number for
precise adjustments.
J. Increasing Button: Increases the dis-
played number when held.
K. Inch/mm Button: Toggles the display
between inches and millimeters.
L. Digital Display: Displays the current
measurement.