Samsung WF209 - Manual (Page 21)

troubleshooting _21
High current detected. Restart the cycle.
If the code reappears, call for service.
High/Low voltage detected. Restart the cycle.
If the code reappears, call for service.
Too many suds are detected
during the washing session.
The unit is put on hold until the
suds are reduced. Then, the unit
will go back to the operation.
When it finishes washing, End and
Sd codes will blink in turn. To prevent it, cut down on detergents.
For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG)
05 tr
oubleshooting
WF209ANW-02440F_EN.indd 21 2009-01-20 ¿АИД 4:05:19