Care of your steam mop – Shark S3501C User Manual
Page 8

TOLL FREE:
1-866-826-6941
www.sharkcompany.com
English
Care of Your Steam Mop
2
Remove	the	micro-fiber	cleaning	
pocket	by	releasing	the	quick	
fasteners	and	using	the	lavender	
loop	on	the	side	of	the	pocket,	
avoiding	contact	with	the	hot	pocket	
or	dirt.	Then	empty	the	water	tank.	
IMPORTANT: Be	very	careful	
because	the	cleaning	pockets	can	
get	very	hot	from	the	steam,	so	use	
caution	when	removing	them.	Let	
the	unit	cool	2-3	minutes.	
3
To store the Shark
®
Steam Mop
hanging	up;	first	remove	the	head	
(after	it	has	cooled	and	the	steam	
has	been	released)	then	hang	on	a	
large	hook.
NOTE:	If	you	want	to	store	it	
standing	upright	then	make	sure	
it’s	leaning	against	a	wall	for	added	
support	and	safety.	Always	store	
your	Steam	Mop	with	the	micro-fiber		
pocket	removed,	away	from	children	
or	high	traffic	areas.
AFTER USE AND STORAGE
1
When you have finished using
the	steam	mop,	and	your	floors	
are	clean,	unplug	the	cord	from	
the	outlet	and	move	it	into	an	
upright	position.	Let	the	unit	cool	
2-3	minutes	and	release	steam	by	
pumping	the	handle	several	times	
before	removing	the	micro-fiber	
cleaning	pocket	from	the	mop	head.	
1
2
3
KEEPING YOUR MICRO-FIBER
CLEANING POCKET AS GOOD 
AS NEW
1
We recommend washing your micro-
fiber	pockets	separately	from	other	
fabrics	to	avoid	picking	up	lint.	
Only	use	liquid	detergent.		
(no	powder	detergent)	Don’t	use	
any	fabric	softeners	or	bleach.	
Line	dry	or	dry	on	a	low	dryer	
setting.
2
If there are loose threads on the
pocket	carefully	cut	the	thread	with	
scissors.	Don’t	pull	on	them	or	cut	at	
the	base.
1
2
