Sanyo VCC-HD4000 - Manual (Page 9)

8
Connections
This camera provides simultaneous delivery of video in the JPEG and H.264 formats and also
bi-directional video between the camera and PC.
● Do not use the power supply of the camera.
● Do not supply power to the PoE hub or PoE power adapter until the camera installation
is finished.
Connection when Using PoE (Power over Ethernet) Power Supply
SD OUT
HDMI
✱1
✱1
✱1 ✱1
A
Connect the camera to the LAN through a switching hub using
shielded LAN cables.
You may extend the transmission distance by using multiple switching hubs with PoE support.
For details on the extendable distance, please refer to the hub performance in the specifications,
etc.
PC
HD Monitor
Monitor
Camera Control Unit
Switching hub
with PoE support
✱1: LAN cable: CAT5 or higher, straight type, Max. 100 m / 109 yds
PC
B
Connect the camera to the LAN through a power adapter and a
switching hub using shielded LAN cables.
Switching hub
Power adapter
L5CL2_XE_US(INSTRUCTION).book 8 ページ ２００８年８月２５日 月曜日 午後３時４３分