Unit description, Specifications – Shindaiwa 68907-94311 User Manual
Page 5
5
Unit Description
Figure 3
Prior to Assembly
Using.Figure.3.as.a.guide,.familiarize.your-
self.with.the.blower.and.its.components..
Understanding.the.unit.helps.ensure.top.
performance,.longer.service.life,.and.safer.
operation.
IMPORTANT!
The terms “left”, “left-hand”, “LH”; “right”,
“right-hand”, and “RH”; “front” and “rear”
refer to directions as viewed by the
operator during normal operation.
IMPORTANT!
Safety and Operation Information Labels:
Make sure all information labels are
undamaged and readable. Immediately
replace damaged or missing information
labels. New labels are available from your
local authorized Shindaiwa dealer.
Before.assembling.the.blower,.make.
sure.you.have.all.required.components..
n
. Power.unit.and.blower.assembly.
n
. This.Owner’s/Operator’s.Manual..
and.a.tool.kit.containing.a.tool.bag..
and.a.combination.spark.plug..
wrench/screwdriver.
Carefully.inspect.all.components.for.damage.
Blower
Tube
Recoil/
Starter
Handle
Fuel
Primer
Bulb
Throttle
Lever
Throttle
Limiter Lever
Exhaust
Air Cleaner
Cover
Fuel Filler
Cap
Blower Air
Ignition Switch
Nozzle
(Standard on
EB3410 and EB2510)
Fan Tip Nozzle
(Standard on EB3410
Optional on EB2510)
Blower Tube
Specifications
EB3410
5.1.kg.(11..lb.)
38.x.30.mm.(1.50.x.1.18.in.)
34.cm
3.
.(.07.cu..in.)
1.0.kW/[email protected],000.min
-1
(rpm)
Specifications.are.subject.to.change.without.notice.
Model....................................................................................................................EB510..........................................
Dry.Weight.(without.Blower.Tubes).........................................................4.9.kg.(10.8.lb.)
Dimensions.(LxWxH)......................................................................................................896.x.55.x.373.mm.(.35.x.10.x.15.in.)
Engine.type........................................................................................................4.cycle.air-cooled.gasoline.engine,.vertical.cylinder
Bore.&.Stroke.......................................................................................34.x.7.mm.(1.3.x.1.1.in.)...........................................
Displacement.............................................................................................4.5..cm
3
(1.5.cu..in.)....................................................
Max.Output/min
-1
........................................................................0.8.kW/[email protected],500.min
-1
.(rpm)
Fuel/oil.ratio...........................................................................................................50:1.with.Shindaiwa.Premium.-cycle.mixing.oil
Carburetor.........................................................................................................................Walbro.rotary-type.with.primer.bulb
Ignition...............................................................................................................................CDI.(Capacitor.Discharge.Ignition)
Spark.Plug.............................................................................................................................................NGK.CMR5H
Starting..................................................................................................................................................Recoil.Starter
Stopping....................................................................................................................................Slide.Switch.(Grounding.type)
Fuel.Tank.Capacity................................................................................................................................0.6.L.(0.0.oz)...........................
Exhaust..........................................................................................................................................Spark.Arrester.Muffler..................
Air.Filtration..........................................................................................................................................Dry.Element