Samsung SIR-S4120R - Manual (Page 20)

4-1 4-2
Changing the Settings
① Use the UP( ) and DOWN( ❷ ) buttons to select the setting you want to change.
➁ Press the ENTER( ) button to accept the choice.
➂ Use the UP( ) and DOWN( ❷ ) buttons to change the value.
➃ Press the ENTER( ) button to accept the choice.
➄ When you press the ENTER button, some setting fields are toggled.
Move to Parent Menu or Menu End
Press the MENU( ) button to move to the parent menu from the lower mode or end the
menu.
Entering the DVR MAIN MENU
Press the MENU ( ) button. Then the following screen should appear.
Selecting a Menu Item
Use the UP( ) and DOWN( ❷ ) buttons to select the menu item you want. A highlighted cur-
sor should appear over the selected item. Next, press the ENTER( ) button to accept the
choice. Settings will be displayed on the left and their values will be displayed on the right.
1
Menu View
Note Note
- Make sure that the VCR LED is off before pressing the MENU button. If the VCR
button had been pressed, the VCR MAIN MENU will be displayed.
- You can go into the menu only if the system is in Live Screen mode. If the system is
in Record or Play mode, you cannot go into the menu. To go into the menu, first
stop recording or playback.
DIGITAL VIDEO RECORDER
MAIN MENU(DVR)
CLOCK/DISPLAY MODE SETUP
RECORD MODE SETUP
ALARM RECORD SETUP
TIMER RECORD SETUP
SYSTEM SETUP
COMMUNICATION SETUP
MOVE=[ / ❷ ] SELECT=[ ] EXIT=[MENU]
MENU MENU