Sunbeam 4040-026 - Manual (Page 12)

1 Jse
Turning Off Your Iron
1 . Turn the Steam Dial to ZERO and Fabric Select
Dial to MIN.
2. Unplug the iron from the power source.
WARNING: NEVER yank the power cord when
unplugging the iron, this can damage the cord.
Storing Your Iron
1 . Allow the iron to cool.
2. If you do not use your iron on a daily basis,
empty the water reservoir after each use for
a longer iron life. To do so, turn the iron upside
down to allow water to flow from the fil1 hole.
Shake the iron gently to remove trapped
water drops.
3. Loosely loop the power cord around the cord
wrap and store the iron on its heel rest.
hnportant:
Wrapping the cord around the iron
too tightly can damage the cord.
Tip: When not ironing, always set the Steam Dial
to ZERO and tbe Fabric Select Dial to MIN.