beautypg.com

1 general electrical safety instructions – Sundance Spas Portofino Series User Manual

Page 8

background image

20. Excessive temperatures may cause hyperthermia. Symptoms

and first aid information are as follows:

HEAT STROKE: The most susceptible people are the very
young and elderly, alcoholics, and most people under the influ-
ence of drugs, medication and alcohol.

SYMPTOMS: Hyperthermia causes loss of salt, sweating,
dizziness, headache, dryness of mouth and nausea, faintness
and/or unconsciousness, convulsions, flushed appearance of
skin, and rapid pulse and/or weak, shallow breathing.

TREATMENT: Place the victim on his back, head slightly el-
evated. Apply wet cloths or ice packs to the head, wrap the body
in a sheet, pouring on a small amount of water. Follow with a
cool shower or bath. Get medical attention as soon as possible.

21. It is recommended that the following emergency telephone

numbers be listed at the nearest telephone: physician, hospital,
ambulance and police.

22. Save these instructions!

3.1 General Electrical Safety Instructions

Your new Portofino spa is equipped with the “state-of-the-art” LX-10
equipment system. It contains the most advanced safety and
self-protective equipment in the industry. Nonetheless, this spa
must be installed properly to insure dependable usage. Please
contact your dealer if you have any questions regarding your instal-
lation. In the event they are unable to answer your questions, direct
your inquiries to Sundance Spas Inc. Please refer to the back of this
manual for our address.

Proper grounding is extremely important. Portofino spas are
equipped with a current collector system. A pressure-type wire
connector is provided outside the control box, located behind the
equipment door to permit connection of a bonding wire between this
point and any ground metal equipment, metal water pipe or conduit
within 5 feet (1.5 m) of the spa, or copper clad grounding rod buried
within 5 feet (1.5 m) of the spa. The bonding wire must be at least
#8 AWG (8.4 mm

2

) solid copper wire. This is a very important safety

assurance feature. Before installing this spa, check with the local
electrical authority to insure the installation conforms to local coun-
try/area state codes.

4