Sundance Spas Portofino Series - Manual (Page 15)

8.0 Control Panel Functions
Panel Functions:
A. Heat Indicator: lit when
heater is on.
B. Warmer Button:
increases water
temperature setpoint.
C. Cooler Button:
decreases water
temperature setpoint.
D. LED Display: can display current water temperature (default
display*), water temperature setpoint, selected filtration mode,
and error messages.
E. Light Button: turns underwater light on and off.
F. Jets Button: turns jets on and off. Press once for low speed;
press a second time for high speed; press a third time to turn
off.
Operation Details:
• Temperature Adjustment: 65 to 104 °F (18 to 40 °C). Software
default setting is 100 °F (38 °C).
• Underwater Light Operation: light runs for 1 hour then shuts off for
increased bulb life.
• JETS button Operation: jets run for 20 minutes after activated
then turn off automatically to conserve energy. Simply press
JETS button to continue operation for an additional 20 minutes.
A
B
C
D
E
F
*Display shown for example purposes only,
actual water temperature display will vary.
11