Heading, Troubleshooting – Sunbeam DF2100 User Manual
Page 22
22
Heading
PROBLEM
POSSIBLE CAUSE
SOLUTION
Strong smell
Oil has gone bad.
Replace oil.
The correct oil is not being used. Use only high quality oil.
Do not mix oils of a
different quality or type.
Oil overflowing
Fryer is filled above the
Check oil level on the inside
maximum level.
of fryer.
Wet food placed in hot oil.
Dry food first.
Stated quantities exceeded.
Do not fry food above the
weight indicated.
Food is not browning
Cooking temperature is too low.
Adjust the dial to the correct
cooking temperature.
Basket is overloaded.
Do not fry food above the
stated quantities and
weights.
Oil is not hot enough.
Faulty thermostat.
Consult Service Centre.
Chips are sticking together Food not washed thoroughly
Wash potatoes thoroughly
before placed in the oil.
and dry before frying.
Appliance not working
Appliance has been turned on
Allow the fryer to cool down,
without fat or oil.
fill with oil and press the
reset button that is
concealed at the back of
the fryer.
Temperature control dial not
Choose cooking temperature.
at correct setting.
Troubleshooting