Siemens CMTC1720 - Manual (Page 11)

Adjusting the OSD Screen (DVI and PC)
11
Siemens Building Technologies
Fire Safety & Security Products 10.2006
7 Adjusting the OSD Screen (DVI and PC)
7.1 OSD Main Menu
The OSD main menu is composed of text and graphics.
1. Press the Menu/Exit button
Î For adjusting the OSD screen the following options are available:
Fig. 1 Options of the OSD main menu
2. Select the desired option by using the two ▲/+,▼/- buttons.
Î The selected option is highlighted in yellow.
3. Press the Source/Enter button to enter the submenu for adjusting items.
4. Change the value you wish to adjust by using the ADJUST ▲/+,▼/- buttons
5. Press the Menu/Exit button once.
Î The settings will be automatically saved to the monitor's memory.
Î The OSD main menu disappears.
NOTE
If the Menu/Exit button is not pressed, the adjusting screen will automatically disappear after a preset
time (in seconds) and the settings will not be saved.
7.2 Adjusting Brightness, Contrast, Volume
Open the OSD main menu and select the option MAIN ADJUST, see chapter 7.1:
OSD Main Menu.
There are three items on this submenu:
z BRIGHTNESS
This option is used to adjust the brightness of the screen.
z CONTRAST
This option is used to adjust the image contrast.
z VOLUME
This option is used to adjust the sound volume.