Schwinn none - Manual (Page 61)

54
Final Check
Install any additional parts that are supplied with your bike.
NOTE: Your bicycle may be equipped with different style
components than the ones illustrated.
Reflectors: Attach the white reflector to the front bracket and
the red reflector to the rear bracket using an 8mm wrench or a
Phillips head screwdriver. Attach the brackets to the bicycle
using the hardware provided. For some models, the front reflector
bracket will be mounted on the front brake assembly bolt that
fits through the fork. It is important to make sure all connections
are tightened securely and that the reflectors are properly
angled.
Pads: If your bike is supplied with pads, wrap the foam inner
cushion around the appropriate bar. Place the outer cover over
the inner cushion and press the velcro together securely. Turn
the pad so the velcro faces the ground.
Chainguards: If not already attached, attach the chainguard to
the bicycle frame using the clamps provided. Secure in place
making sure the guard does not bind or get caught on the
chain.
Tire Pressure: Check tire pressure, inflate to the range
recommended on the tire sidewalls.
Pegs: There are many different types of pegs-too many to deal
with individually in this manual. Please see your dealer for spe-
cific information regarding peg installation.
Before riding, ensure all nuts, bolts and fittings
on the bicycle have been correctly tightened.
Rear
Reflector
(Red) Front
Reflector
(White)
Pads
Chainguard