Schwinn none - Manual (Page 16)

04
Your new bicycle was assembled and tuned in the factory and then partially disassembled for shipping. You
may have purchased the bicycle already fully re-assembled and ready to ride OR in the shipping carton in the
partially disassembled form. The following instructions will enable you to prepare your bicycle for years of
enjoyable cycling. For more details on inspection, lubrication, maintenance and adjustment of any area please
refer to the relevant sections in this manual. If you have questions about your ability to properly assemble this
unit, please consult a qualified specialist before riding. If you need replacement parts or have questions pertain-
ing to assembly of your bicycle, call the service line direct at:
SERVICE AND TECHNICAL SUPPORT :
1.800.626.2811
Monday - Friday 8:00 a.m. - 5:00 p.m. Central Time.
Tools Required:
Phillips head screw driver; 4mm, 5mm
6mm & 8mm Allen keys; adjustable
wrench or a 9mm, 10mm, 14mm & 15mm
open and box end wrenches; and a pliers
with cable cutting ability.
To avoid injury, this product must be properly assembled before use. If your bicycle was
obtained assembled, we strongly recommend that you review the complete assembly
instructions, and perform checks specified in this manual before riding.