Skyworth SLTV-2632A-2 - Manual (Page 20)

The Sound menu lets you adjust audio output. To
access the Sound menu, press MENU on the remote,
and then select Sound from the Main Menu. The
following sound items can be adjusted:
Bass Improves bass output.
Treble Improves treble output.
Balance Adjusts how much audio is sent to the left
and right speakers.
Analog Sound Controls the way the sound comes
through your speakers. The options available vary
according to the input selected.
Mono (available for regular TV viewing only) Plays
the sound in mono only. Use this setting
when receiving broadcasts with weak stereo signals.
Stereo Splits the incoming stereo audio signal into
left and right channels. Most TV programs and
recorded materials have stereo audio. The word
Stereo appears in the channel banner when you tune
to a program that is broadcast in stereo.
Second Audio Program (SAP) Plays the program's
audio in a second language, if one is available. The
letters SAP appear in the channel banner when you
tune to a program that is broadcast with SAP
information. SAP audio is broadcast in mono. SAP is
also used to broadcast a program's audio with
descriptions of the video for the visually impaired.
DIGITAL SOUND Choose the language you prefer
for dialog on digital channels. If your preferred
language is being broadcast with a program, then the
TV plays it. If not, then the TV plays the default audio
for the program (usually English in the U.S.). The
default digital channel audio language options are
English, French, Spanish.
PRESETS Press the button to enter the PRESETS
menu adjust audio output. select SPDIF Output
option, you can select OFF, AC3 and PCM.
CH+/CH- Buttons Press PRESETS button to enter
the CH+/CH- menu and by left or right key to adjust
CH+ and CH- button's function. You can select ALL
Channels, TV Channels, Favorite Channels.
Sound Menu
-19-
Using The Menu System
CH+/CH- Buttons ALL Channels