Sharp XL-ES50 - Manual (Page 18)

18
XL-ES5
XL-ES50
C
D
P
lay
b
a
ck
Listening to a CD (CDs) (continued)
„ Various CD functions Notes:
Caution:
z Do not place two CDs in one disc tray.
z Do not play discs with special shapes (heart- or octagon-shaped)
as it may cause malfunctions.
z Do not push the disc compartment while it is moving.
z If the power fails while the disc compartment is open, wait until
the power is restored.
z If the disc compartment is stopped with force, the unit will not
function. If this occurs, press the ON/STAND-BY button to enter
the power stand-by mode and then turn the power on again.
z If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
z If a disc is damaged, dirty, or loaded upside down, the disc will
skip or not play.
Function Main unit Remote
control
Operation
Play Press in the stop mode.
Stop Press in the playback
mode.
Pause Press in the playback
mode. Press the / but-
ton to resume playback
from the paused point.
Track up/
Track down Press in the playback or
stop mode.
If you press the button in the
stop mode, press the /
button to start the desired
track.
Fast for-
ward/Fast
reverse Press and hold down in the
playback mode.
Release the button to re-
sume playback.
z Track up/track down and fast forward/fast reverse are possible
only within one disc.
z When the end of the last track is reached during fast forward, "
END" will appear on the display and CD operation will be paused.
When the beginning of the first track is reached during fast re-
verse, the unit will enter the playback mode.
( : Last track number)