Samsung MW1030WA - Manual (Page 12)

12
Operation
Turning on the Power and Selecting a Weight
The first time you plug the power cord into an outlet, or after there has
been an interruption in power, the display shows “
” At this point,
you can select the weight system for the display. You can choose
between pounds (LBS) or kilograms (KG). To do so,
1
Press 0 immediately after plugging in your microwave. The display
will show:
If the display does not shows “Kg”, you will need to unplug the
microwave and then plug it in again in order to change to the weight
selection.
2
Press 0 repeatedly to select the weight system you wish to use:
When you have selected the weight system you want to use, press
the PAUSE/CANCEL button to end this procedure.
Setting the Clock
1
Press the Clock button. The “ENTER” and “TIME” indicators flash.
2
Use the number buttons to enter the current time. You must press
at least three numbers to set the clock. If the current time is 5:00
enter, 5,0,0.
3
When 5 seconds has elapsed, “ENTER” indicator flash and “Cloc”
will be displayed.
4
Press Clock again. A colon will blink, indicating that the time is set.
If there is a power interruption, you will need to reset the clock.
You can check the current time while cooking is in progress by
pressing the Clock button.
Using the Pause/Cancel Button
The Pause/Cancel button allows you to clear instructions you have
entered. It also allows you to pause the oven’s cooking cycle, so that
you can check the food.
•
To pause the oven during cooking: press Pause/Cancel once. To
restart, press Start.
• To stop cooking, erase instructions, and return the oven display to
the time of day: press Pause/Cancel twice.
• To correct a mistake you have just entered: press Pause/Cancel
once, then re-enter the instructions.
kg g oz Lbs cup .
START ENTER COOK TIME TIME2
Kg g Oz Lbs. QTY.
START ENTER COOK TIME TIME2
Kg g Oz Lbs. QTY.
START ENTER COOK TIME TIME2
Kg g Oz Lbs. QTY.
БВГДБЕЖЕДЗИГДБЙЖЕДЗВВВБЙВВ !"#$ВЗ!%В&$ВЙЕЕЙВВ&'(ЕВЗГ