Sony RM-VLZ620 - Manual (Page 8)

8
RM-VLZ620_U (US) 4-170-639-12(1)
Getting Started
Installing the Batteries
Slide open the battery compartment
lid and insert two size AA (R6) dry
batteries (not supplied).
Insert the batteries (negative end
first) into the battery compartment
as shown below.
Note
Even if you replace the batteries, your
manufacturer’s code settings or learned/
programmed remote signals remain stored.
Battery life
Under normal conditions, size AA
(LR6) alkaline batteries will last up
to one year. If the RM-VLZ620 does
not operate properly, the batteries
might be drained. If this happens,
replace both batteries with new
ones.
Notes on batteries
 Do not use an old battery with a new one,
or mix different types of batteries together.
 If the electrolyte inside the battery should
leak, wipe the contaminated area of the
battery compartment with a cloth and
replace the old batteries with new ones. To
prevent electrolyte from leaking, remove
the batteries if you plan not to use the RM-
VLZ620 for a long period of time.