Sharp HT-SL75 - Manual (Page 9)

E-8
2011 October 7 HT-SL70 / HT-SL75 ZB042
1. Pull out the cover of sound bar stand as below.
2. Slot in the sound bar into the sound bar stand and fix its
cover as shown.
3. Slot in the sound bar to the base stand according to your
TV size.
1. Fix the brackets to the holes as shown.
System preparation (continued)
For model
HT-SL75 Use sound bar stand cover : 10 - 2/16" (257 mm).
Use stand base : 13 - 7/32" (336 mm).
For model
HT-SL70 Use sound bar stand cover : 6 - 3/32" (155 mm).
Use stand base : 6 - 15/16" (176 mm).
2. Using stand (vertical arrangement)
Sound bar
stand cover
Cover
1
3
- 7/
3
2"
(33
6 mm)
6 - 15/16" (176 mm
)
46" TV
60" TV
Groove to
neatly arrange
the wire in.
(For model HT-SL75)
(For model HT-SL70)
52" TV
70" TV
Groove to
neatly
arrange the
wire in.
Slot in the wire inside the
groove or slit for better
wire arrangement.
Suggestion of the
sound bars and
LCD TV arrangement.
3. To mount the sound bar on the wall
LEFT
RIGHT
(Model HT-SL75 : for 60" and 70" TV)
(Model HT-SL70 : for 52" TV)
LEFT
RIGHT
(Model HT-SL70 : for 46" TV)
Caution:
Be careful not to
fix the bracket
upside down.