System preparation – Sharp HT-SL75 User Manual
Page 8
9
1
7
6
5
4
3
2
1
9
HT-SL70 / HT-SL75
E-7
2011 October 7
Select from three installation methods according to the
preferred position.
For 52", 60" or 70" TV sound bar assembly
1. Pull out both joint covers as below.
2. Place the two sound bars near to each other and slot in
the sound bar joint and its covers as below.
For 46" TV sound bar assembly
1. Pull out the joint cover as below.
2. Place the two sound bars adjacent to each other and
slot in the sound bar joint and its cover as below.
To fix the sound bar stand
1. Peel off the double sided tape separator and attach the
sound bar stand cushion at the bottom surface of the
sound bar stand.
2. Fix the sound bar stand as shown.
System preparation
Make sure to unplug the AC power cord before
installing the unit or changing the position.
For model
HT-SL75
Use Sound bar cover joint (short : 369 mm)
for 60" TV.
Use Sound bar cover joint (long : 594 mm)
for 70" TV.
For model
HT-SL70
Use Sound bar cover joint (long : 188 mm)
for 52" TV.
For model
HT-SL70
Use Sound bar cover joint (short : 55 mm)
for 46" TV.
1. Using stand (horizontal arrangement)
Sound bar joint
Cover
SO
UN
D B
AR
H
OM
E T
HE
AT
ER
SY
ST
EM
HT
-SL
70
Front side of
the sound bar
Right
Left
SOUND B
AR HOME
THEA
TER
SY
STEM HT
-SL70
SOUND B
AR HOME
THEA
TER
SY
STEM HT
-SL70
Sound bar joint (short)
Cover
SO
UN
D BA
R H
OM
E T
HE
AT
ER
SY
ST
EM
H
T-S
L70
Front side of
the sound bar
Right
Left
Sound bar stand cushion
Double
sided
tape
separator
Sound bar
stand
Hook
Note:
Sound bar stand can be removed
by pulling it off backward from
the sound bar.
Suggestion of the
sound bars and
LCD TV horizontal
arrangement.