For the a4 – Soundstream Technologies Angina A4 User Manual
Page 6
for the A4
for the A4
Top Panel View
2.
Subsonic Hawkins Bass Control Switch Select “Subsonic” to
engage the Subsonic filter at
Select ‘Hawkins Bass
engage the
boost 45Hz for the
channel.
3.
Switch Select “ST” for normal stereo operation. “MO”
for bridged mono operation with a single input signal (number 2 input
only). “LP” for low pass bridged mono operation with input from chan-
nels
4.
Switch Select “ST” for normal stereo operation. “MO”
for bridged mono operation with a single input signal (number 3 input
only).
low pass bridged mono operation with input from chan-
nels
5.
Input Selection Switch Selectable inputs for channels
from
internal (channels
or external (channels
Front Control Panel View
6.
Fuse Main power supply fuse. Warning: Rep/ace on/y
the same
value fuse!
Connected to a fuse or circuit breaker, then to the battery’s
positive terminal.
8.
9.
10.
11.
12.
13.
14.
15.
Remote Remote turn-on input from the head unit. Accepts
GND Main ground connection. Bolt to a clean chassis point in the
vehicle.
Speaker Connection Terminal Speaker connections for channels
and
Low Pass Filter Control Adjustment Crossover frequency control
for the internal low pass filter.
Input Levels Stereo input level control for channels
Input Levels Stereo input level control for channels
RCA Inputs Right and Left channel RCA inputs for channels
and
Crossover
High pass crossover frequency settings for ampli-
fier.
Bottom Plate View
------------
10
11