Sony CDX-C5850R - Manual (Page 24)

24
Displaying the disc memo
Press (DSPL) during CD or CD TEXT disc
playback.
Each time you press (DSPL) during CD,
CD TEXT disc or MD playback, the item
changes as follows:
* If you connect an optional CD unit with the
CD TEXT function, the CD TEXT information
will appear in the display when you play a CD
TEXT disc.
Erasing the disc memo
1
Press (SOURCE) repeatedly to select CD.
2
Press (MODE) repeatedly to select the CD
unit.
3
Press (PTY/LIST) for two seconds.
4
Press (DSPL) for two seconds.
5
Rotate the dial to select the name you
want to erase.
6
Press (6) (ENTER) for two seconds.
The name is erased.
Repeat steps 5 and 6 if you want to erase
other names.
7
Press (PTY/LIST) for two seconds.
The unit returns to normal CD playback
mode.
Note
When a personalised label is erased, the original
CD TEXT information will appear in the display.
Labelling a CD
— Disc Memo
(For a CD unit with the custom file function)
You can label each disc with a personalised
name. You can enter up to eight characters for
a disc. If you label a CD, you can locate the
disc by name (page 25) and select the specific
tracks for playback (page 26).
1
Play the CD and press (PTY/LIST) for two
seconds.
2
Enter the characters.
1 Rotate the dial clockwise to select the
desired characters.
(A n B n C n ··· Z n 0 n 1 n 2 n
··· 9 n + n – n * n / n \ n > n <
n . n _ )
If you rotate the dial counterclockwise,
the characters will appear in reverse
order.
If you want to put a blank space
between characters, select “_” (under-
bar).
2 Press (5) (n) after locating the
desired character.
The flashing cursor moves to the next
space.
If you press (2) (N), the flashing cursor
moves to the left.
3 Repeat steps 1 and 2 to enter the
entire name.
3
To return to normal CD playback mode,
press (PTY/LIST) for two seconds.
Tip
To erase or correct a name, enter “_” (under-bar)
for each character.
$
Track number/
Elapsed playback time
$
Disc memo name
$
Track name*
$
Clock