Siemens INFINITI Pro - Manual (Page 12)

12
Safety note for instruments with audio input
The audio input can only be connected to power supplied
devices if they fulfil at least the safety provisions of
IEC 65 / DIN VDE 0860.
Your hearing instrument has an audio input. This enables
accessories to be connected. In this way you can understand
better in certain hearing situations.
The contacts for the audio input are located under the type
plate. Before using the audio input for the first time the
covering type plate must be exchanged against the supplied
type plate providing openings for the audio contacts. Your
hearing instrument specialist will do this for you. The coloured
type plates can be used to identify your left (blue) and right
(red) hearing instrument.
Your hearing instrument recognizes immediately when an
audio shoe is fitted and diverts then automatically to pro-
gram ”4”
. You can notice this by the four beep tones .
Fitting the audio shoe to the hearing instrument
Hook the audio shoe in from the front and press it to the
rear into the detent on the inner curve of the instrument.
Audio input program
1 2 3