Sharp MD-SR50H - Manual (Page 32)

32
3
Press the DISP button repeatedly to select
the type of characters.
● The first 3 characters in the group of the selected
characters will be displayed for about 1 second.
4
Press the
5 5 5 5 5
or
4 4 4 4 4
button repeatedly to
select the letter.
5
Press the ENTER/SYNC button to enter it.
6
To enter more letters, repeat steps 3 - 5.
7
When the name has been completely en-
tered, press the EDIT button.
Advanced Features
31
Titling a MiniDisc
Creating disc and track names
One disc name and up to 255 track names can be created
per disc (A maximum of 100 characters for the disc and
each track name and a total of 1,700 characters can be
entered).
1
Whilst in the stop
mode, press the
EDIT button to select
“DISC NAME”. Whilst in the pause
mode, press the
EDIT button to select
“TRACK NAME”.
Disc name Track name
Position where the next letter will be entered
(Capital letters) (Lower-case letters) (Numbers and symbols)
2
Press the ENTER/SYNC button.
● The unit will enter the character input mode.
● To cancel the operation, press the • ■ /:OFF
button.
Cursor