SUPER MICRO Computer AOC-USAS-S4I User Manual
Page 21

5-1
Safety Information and Technical Specifications
Chapter 5
Installing the Driver
on an Existing Operating System
5-1 Overview
This section gives instruction on installing the drivers on an existing Operating
system. Before installation you must use the Adaptec RAID controller and internal
disk drives. In addition, you must create the driver disk.
5-2 Creating a Driver Disk
To create a driver disk:
1 Configure the system to boot from the CD-ROM. See your system's documenta-
tion for instructions on doing this.
2 Power on the system and insert the RAID Installation CD. This CD is found in
the RAID controller kit.
3 Navigate past the welcome and license windows to Adaptec Start Menu.
4 Click Create Driver Disk(s) for Installing/Updating your OS and select Windows
or Linux.
5 When prompted, insert a floppy disk and click Ok to continue and create the
driver disk
6 Remove and label the driver disk.