Creating an array with adaptec storage manager – SUPER MICRO Computer AOC-USAS-S4I User Manual
Page 15
3-3
Safety Information and Technical Specifications
9. If necessary, at the cache warning message, type Y for Yes.
10. At the successful array creation, click any key to return to the ACU Menu.
The array is created but is not immediately available until the build process is
finished.
11. Click the Esc key until the Exit utility window appears.
12. Select Yes, and then click Enter to restart the computer.
13. Continue with Making Your Array Bootable.
Creating an Array with Adaptec Storage Manager
This section details how to use the Adaptec Storage Manager configuration wizard.
The Adaptec Storage Manager Install CD is required.
To create a RAID 1 array:
1. Restart the computer with the Adaptec Storage Manager Installation CD in the
CD drive.
2. Select your language, then click Enter.
3. After reviewing the license, click Enter.
4. Click Launch Configuration Utility.
5. Click the Create button. This opens the Configuration Wizard.
6. Select "ExClick configuration..." and click the Next button.
7. Review the information that is displayed.
Note: In DAS environments, Adaptec Storage Manager refers to arrays as "logical
drives".
If you want to make changes use the Modify logical devices settings.
8. Click Apply to build the logical drives and save the Adaptec controller.