Sony VPCSB User Manual
Page 2
VPCSB Series Hard Disk Drive
Replacement Instructions
FOR TECHNICAL SUPPORT IN THE US CALL TOLL FREE 1-866-651-7669 FROM 9:00 AM TO 11:00 PM EST
P/N
989202617
Rev. B
2/4
Step 3: Take note of the Battery Pack
and Hard Drive (HDD) location.
Step 2. Slide the Hard Drive/Battery
Door towards the Bottom edge of the
unit to remove.
Step 4. Locate the Battery Lock. Slide
down to the “UNLOCK” position and
hold. Grasp the Battery from the Left
side and lift up to remove.
HDD Removal
Step 1. Using two fingers, lift the HDD
Cable straight up to disconnect from the
unit.
Step 2. Using the enclosed magnetic
screwdriver, remove the four (4) screws
securing the HDD Assembly.
Put the screws aside to re-secure the
HDD later in the procedure.
Step 3. Grasp the Right side of the
HDD and carefully lift from the unit to
remove.
HDD Disassembly
Step 1. Using two fingers, slide the Hard
Drive Cable away from the Hard Drive to
disconnect.
Step 2. Identify the four (4) side screws
which secure the HDD Brackets to the
HDD.
Step 3. Remove the screws &
brackets.
Put the Brackets and screws aside
for transfer to the new HDD.