Shure ULX Wireless System - Manual (Page 10)

10
ULX2 TRANSMITTER FEATURES AND CONTROLS
FIGURE 19
Grille. Protects the microphone cartridge and helps reduce breath sounds and wind noise. The grilles of the various
microphone heads differ in appearance.
Display Window. Displays Group and Channel setting, battery power level, and PEAK indicator.
Battery Level Icon. Indicates amount of battery life remaining.
PEAK Icon. This icon appears when the input signal overloads the transmitter. The icon is displayed for 2 seconds
after input overload is detected.
GROUP Display. Indicates the frequency Group number in which the transmitter is operating.
CHANNEL Display. Indicates the current Channel number within the frequency Group.
MODE Button. Selects Group or Channel mode.
SET Button. Changes Group or Channel setting.
Power/Battery LED. When the Power switch is in the ON position, this LED will glow green, indicating that the trans-
mitter is on. This LED will turn red when the battery is low. Refer to the “Checking the Transmitter Battery Power”
paragraph.
Power ON/OFF Switch. Turns the transmitter on and off.
Audio Gain Control. Changes the audio level sensitivity to accommodate various sound sources (e.g. loud singing
or soft speaking). Refer to the “Transmitter Gain Adjustment” paragraph).
9 V Battery. Provides power to the transmitter and microphone.
Battery Cover. Unscrews to expose battery and Gain control.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.