beautypg.com

SECO-LARM USA 16-Port Passive Transceiver Hub EVT-PH16-4T2 User Manual

Enforcer, Video, Port passive transceiver hub

background image

®

17.25” x 6.75” x 1.75” (482 x 170 x 44 mm)

The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints.

Features:

Connects up to 16 CCTV cameras using

low-cost CAT 5e UTP cable to a central location.
Works in conjunction with passive video or active video baluns.
Works with full-motion CCTV cameras up to 2,000 feet (610

meters) away via passive video baluns.
Feeds the camera signals to nearly any standard video multiplexer

or switcher or digital video recorder via coax cables.
Built-in RS485 port connects to a PC or other device to control the

pan, tilt, and zoom (PTZ) of up to 16 remote cameras or devices.
Compact enclosure, only 1U (1.75 inches) high. Mounts in a

standard 19-inch rack.
Built-in transient protection and interference technology for

existing UTP cables.
Complete passive operation, no power required.

The EVT-PH16-4T2 allows up to 16 color or monochrome CCTV
cameras to be connected via inexpensive CAT 5e unshielded
twisted pair (UTP) cable to a video switcher or multiplexer. It cuts
the cost and complexity of security networks by eliminating the
need to run expensive coax cable to multiple CCTV cameras. A
built-in RS485 port allows the transmission of PTZ (pan/tilt/zoom)
signals to up to 16 CCTV cameras or other devices.

SECO-LARM

®

U.S.A., Inc.,

16842 Millikan Avenue, Irvine, CA 92606 Tel: 1-800-662-0800 (Domestic U.S. & Canada)

Tel: 1-949-261-2999 (California & International) Fax: 1-949-261-7326 Email: [email protected] Website: www.seco-larm.com

Typical Installations:

Specifications:

Video input ports
Video input cables

Video output ports
Video output cables
Data input
Data output
Power
Surge protection
Size
Weight
Material

16 x 2-wire ports on removable terminal blocks
Unshielded twisted pair (UTP), min. CAT 2. Use CAT 5e or

better for best range and video signal.
16 x BNC connectors, each 1Vp-p, 75 ohms.
Coax.
1 x 2-wire port, for PTZ control signals from a PC.
16 x 2-wire ports on removable terminal blocks.
No power required.
Video and data
1U form factor, 17.25” x 6.75” x 1.75” (482 x 170 x 44 mm)
4.9 lb. (2.2kg)
Steel cabinet, black matte finish.

Dimensions:

VIDEO

ENFORCER

Range: Up to 2,000’ (6100m)

Video

!

Data

!

Surge Protection

16-Port Passive

Transceiver Hub

EVT-PH16-4T2

Balunse.pmd

Data

In

Video Out

{

Monitor

{

Video in / data

Video

Data