Seiko Group OC CS 6060 IP-6600 - Manual (Page 81)

2-37
Section 2 Basic Operations
7
Manually turn the scroller flange in the direction of
winding to wind the paper slightly.
8
Check the positions of the paper and winding sensor,
and install it.
6
Tape the edge of the paper on the lead paper at three
positions: both sides and center.
Paper tube
Tape
Tension roller
Tension roller
Paper
Lead paper
Tape
Winder switch
Winder switch
Installing Paper on Winder
9
Check the position of the winder switch:
Switch position Winding
Outside Outside
Centre Off
Inside Inside