Sony PAM-200 - Manual (Page 3)

PAM-200
Installation Manual Page - 3 -
Parts List
NOTE:
This mount is shipped with all proper installation hardware and components. Make sure that none of
these parts are missing and/or damaged before beginning installation. If there are parts missing
and/or damaged, please stop the installation and contact Sony Electronics (800) 222-7669.
NOTE: Please review all WARNING and CAUTION statements (see Page 8) before beginning the
installation of the PAM-200.
PAM-200
(Qty 1)
#14 X 2” Wood
Screw (Qty 3)
M4 x 10mm
Security Screw
(Qty 3)
Nylon Spacers
(Qty 3)
M4 x 16mm
Security Screw
(Qty 3)
M4 x 12mm
Security Screw
(Qty 2)
M4 External
Washer (Qty 2)
Installation Tools
Phillips Head Screw Driver Portable Drill
Soft Material/ Blanket Pencil
Tape Measure Stud Finder (Commercially Available)
Ladder M5 Security Allen Wrench (Supplied)
M3 Security Allen Wrench (Supplied) Masonry Bit (Commercially Available)
¼” Wood Drill Bit – Ceiling Installation 5/16” Masonry Drill Bit – Concrete Installation
(Commercially Available) (Commercially Available)