beautypg.com

Siemens Chem-Ad Series User Manual

Page 4

background image

Technical Data

Maximum Capacity USGPH (LPH) 60 Hz
LPH @ 50 Hz

0.06 (0.24)

0.16 (0.6)

0.29 (1.08)

0.44 (1.68)

0.2

0.5

0.9

1.4

Max. Back Pressure

120 PSI, 60 Hz / 10 Bar, 50 Hz

Piston Diameter (mm)

3

4.76

6.34

8

Stroke Frequency Max. (SPM) @ 60/50 Hz

144 / 122

Capacity / Stroke Max. (cm

3

)

0.027

0.068

0.12

0.19

Accuracy

± 2 % over 10:1 range (minimum of 20 % stroke length)

Max. Suction Lift at 100%*

6 Ft (2 Meters)

Max. Back Pressure of Return

4.5 PSI / 0.3 Bar

Suction and Return

2m Duo Hose 6mm ID Supplied

Metering Discharge

1/4" OD x 0.040" Wall Thickness

2mm x 4mm

4mm x 6mm

Power Supply

115 V, 60 Hz (230 V, 50 Hz)

(Power Cord and Plug Supplied)

Current (mA) 115/230 VAC

172 @ 60 Hz / 81 @ 50 Hz

Max. Power Input (W) 115/230 VAC

18.7

Enclosure

IP 65

Max. Ambient Temp.

104°F (40°C)

Insulation Class

B

Alarm Output
Low Level and Tank Empty Contact

Dry contact 24 V, 3 Amps AC/DC or 240 V, 3 Amps AC/DC

mA Input

0/4-20 mA (E30) / 0/4-20 mA or 20-4/0 mA (E60 & E60 Plus)

Max. Impedance 50 Ohms

Pulse Input

Dry contact, Min. 15 msec pulse width

E30 Max. Frequency - 144 Pulse/min., E60 & E60 Plus - 50 Hz

Stroke Signal Output

1 Pulse Per Stroke, Dry Contact Rated 24 V DC, 300 mA

Weight

6 lbs / 2.4 Kgs

* Suction lifts with clean, wetted valves
Suction Lance with tank level switches is recommended for all capacities.
All data refers to water at 68ºF as per the instruction manual.

www.usfilter.com

The information provided in this brochure contains merely general descriptions or
characteristics of performance which in case of actual use do not always apply as described or
which may change as a result of further development of the products. An obligation to provide
the respective characteristics shall only exist if expressly agreed in the terms of contract. Chem-
Ad and PM Kits are registered trademarks of Siemens.

Siemens Water Technologies
1901 West Garden Road
Vineland, NJ 08360
www.usfilter.com
[email protected]

TI 440.600-1 UA 3/06

Tel: 856.507.9000

Fax: 856.507.4125

Subject to change without prior

notice

©Siemens 2006

Materials of Construction

Pump Head: PVDF
Metering Piston/Cylinder: Ceramic
Diaphragm: PTFE-EPDM Composite Diaphragm
Valves: PVDF
Valve Balls: Ceramic
O-Ring: FPM, or EPDM, FFPM/ Isolast
Valve Springs: Hastelloy
Housing/Finish: Thermoplastic Polyester

Dimensions (See Literature)

CN 441.600 - Unit Dimensions
CN 441.601 - E11/E30 Control Panel
CN 441.630 - E60-E60 Plus Control Panel
CN 441.650 - OGM Dimensions