Scion PT546-00100 - Manual (Page 37)

37
Connecting an
external amplifier
When you connect an external
amplifier to RCA connectors, please
install according to the amplifier
manual.
Subwoofer output
CAUTION
A s t a n d a r d s p e a k e r ' s
in p u t i s r a t e d 17. 5 W
input (largest 40 W input).
W h e n a n a m p l i f i e r i s
c onn e c t e d t o t h e RC A
o u t p u t , m a k e s u r e t o
change the speaker that
corresponds to the output.
If you connect to a standard
speaker, this may cause to
catch fire, emit smoke, or
cause damage. •
NOTICE
The output of an inter-
n a l a m p l i f i e r w i l l n o t
stop even when an exter-
n a l a m p l i f i e r i s c o n -
nected the RCA output.
When cutting off the inter-
nal amplifier output cable,
protect the cut surface to
prevent short circuits.
Subwoofer output of this
unit is monaural. The output
level cannot be adjusted
w i t h FA D E R / B A L A N C E
on the AUDIO CONTROL
Menu.
Beeps will not be audible
if an external amplifier is
connec ted to the Front
output. •
•
•
Using the Steering
Controller
In vehicles equipped with one, you
can use the steering controller to
operate this product.
Operation button names and
functions.
7 Volume buttons ( ª , · )
Press ª to raise the volume level.
Press · to lower the volume level.
7 Mode selection button (MODE)
• When power to this product is
OFF:
Press the button and power switches
ON.
• When power to this product is ON:
Each time you press the button the
source* changes. If you continue
pressing the button for an extended
period, power to this product
switches OFF.
* The source switches in the follow-
ing order:
FM1 = FM2 = CD(MP3/WMA/AAC) =
(AUX) = (iPod/USB) = AM =(SAT1)
= (SAT2) = (SAT3) = FM1